How to use the car door window switch?

Hits：527         Date：2018/6/28

The power window is pulled by a reversible motor. Each motor is protected by a built-in circuit breaker. If the window switch is opened too long (the window is blocked or after the upper and lower limits are exceeded), the circuit breaker will disconnect the circuit and wait for cooling. Automatic reset.
When the ignition switch is in the RUN or START position, or after 10 minutes in the OFF position, the integrated controller powers the coil voltage of the power window relay, the relay contacts close, and the voltage leads to the power window main switch and the window switch in the door. .
1, the driver window
When the ignition switch is in the RUN or START position, the voltage through the integrated controller leads to the power window relay coil, the power window relay contacts close, and the voltage leads to the driver power window switch to adjust the driver side switch to Auto
In the Down position, the voltage passes through the driver window switch to the power window motor. When the motor is running, the controller receives pulses from the pulser input signal. When the window is completely lowered, the motor stops and the pulser no longer generates pulse signals. After the controller at the input of the pulser senses, the voltage is no longer sent to the power window motor.
2, the driver next to the car window
When the ignition switch is in the RUN or START position, or after 10 minutes in the OFF position, the integrated controller will switch on the power window relay voltage, the relay contact is closed, and the voltage leads to the driver side power window switch. When this switch is in the UP position , The voltage passes through the main power window motor. The motor rides on the railway and passes through the driver's power window switch. When the switch is adjusted to the UP position, the power window motor always pushes the window up; when it is adjusted to the DOWN position, the voltage The direction is reversed. When you hold DOWN and do not release, the motor will move the window down.
3, passenger window
Ignition switch is turned OFF position 10 minutes after the RUN, the voltage is sent to the power window relay coil by the integrated controller, the power window relay contacts are closed, the voltage is supplied to all window switches, when the main instrument panel switch is turned on The passenger window can be controlled by the door switch or master dashboard.
When the right front door window switch is turned to UP, the voltage leads to the right front power window motor. The motor realizes the ground connection through the right front power window switch and the main dashboard switch contact. The window is lifted until the UP position is released, as will the front right. When the door/window switch is turned to the DOWN position, the voltage will go in the opposite direction; the window will be removed until the DOWN is released, and the operation of the other windows is similar.

On a message：What is the AC switch for a car?      Next information：What is the car door knock switch?